Re: powertrax locker...HELP!!!

From: Tom F. Buban (biokiller@ameritech.net)
Date: Sun Jul 22 2001 - 11:50:44 EDT


Mine does this to. It's the locker. There is some play in it so you get a clunk,
and it will roll more when you put it in park.

Tom

yllwdkta wrote:

> It isn't that severe but I do have a couple of questions. I put the no-slip
> locker in yesterday and it went in beautiful after I took some metal off the
> outside of the C-clip. One question I have though, when I was testing it
> they said to push the driver side wheel forward and push the passenger wheel
> forward and they should not move. it didn't which is what it's supposed to
> do. The do the same for the driver side and push the passenger side
> backwards and it should move...It didn't but it's supposed to. I went ahead
> and put the truck on the ground and made some turns in the driveway. It
> make a pretty loud clunk when disengaging. Some are pretty loud and others
> are soft. I drove it for about 100 miles and it quieted down after I got
> close to 100 miles until I was in my driveway and it made a pretty load
> clunk when I put it in reverse?
>
> ED, I know you did this. does yours make some clunking noise when
> disengaging. Has it quieted down? I may make a video clip of it to send
> you.
>
> Tim Althoff
> http://www.angelfire.com/oh3/yellowdakota/index.html
> 99 Solar Yellow RC V-6 Manual



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:10 EDT