I didnt see the original post, but I assume your talking about a regular
cab... if thats the case... I have to punch xlc 12's in my gen III regular
cab. (actually 1, as I blew one...) but I plan to go to a solobaric 15
pretty soon anyway. Which requires less than a cubic foot of airspace. Not
too bad for a good sized sub. Look into solobarics if you want good bass, in
little space...
Wes
----- Original Message -----
From: <Quadcrazed4by4@cs.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, July 22, 2001 10:09 AM
Subject: Re: DML: Could I fit a subwoofer in here?
> yes there is room to fit a sub if you make a custom box ..you can fit an
8"
> possibly two with subs that requier small air space in a sealed enclosure
> ..or you can fit a 10 " sub the ten inch sub just barley fits width wise
you
> gotta make your box to about 10 1/4 -10 1/2 inches wide when ya cut the
hole
> for the sub you will need to trim the top of the walls a bit how much
depends
> on the sub itself's basket and the thickness of the wood used .. i had a
10"
> jl 10w6 in this spot befor ein a gen III if ya want any more inmfo on it
let
> me know ill be glad to help ..
> jake
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:10 EDT