Re: Re: RE: Re: RE: stock fuel pressure

From: Mark Kuzia (flyboy01@mediaone.net)
Date: Tue Jul 24 2001 - 22:13:40 EDT


I was hoping to be able to adjust it, to compensate for changes.

Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph
~360ci, 5-spd, 8 3/4 rear / 3.90-SG
1994 Dakota 15.36 @ 91.56 mph
~318ci, 5-spd, 3.90 LS (bone stock, no mods)

----- Original Message -----
From: "Jon Smith" <jon@fast4x4.net>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, July 24, 2001 12:44 AM
Subject: DML: Re: RE: Re: RE: stock fuel pressure

> so Mark, if you're lookin for 8-10psi more, I wonder if a Gen III fuel
pump
> would be a direct replacement? I think I'll make a few calls
tommorrow...
> __________________
> Jon Smith
> Raleigh, NC
> '95 CC 318 4x4 auto
> 344rwhp/424tq
>
>
>
> 1994/95 Fuel Pressure: Fuel Pressure At Idle 35-45 psi
>
> The Gen-III Dak's use higher fuel pressure.
>
> - Bernd
>
>
>
> My fuel pressure has always been 39.5 psi with two different fuel pumps
> and regulators?!?!?! Is that too low?
>
> Mark Kuzia
> flyboy01@mediaone.net http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 102.45 mph
> ~360ci, 5-spd, 8 3/4 rear / 3.90-SG
> 1994 Dakota 15.36 @ 91.56 mph
> ~318ci, 5-spd, 3.90 LS (bone stock, no mods)
>
>
>
> ----- Original Message -----
> From: "Bernd D. Ratsch" <bernd@texas.net>
> To: <dakota-truck@buffnet.net>
> Sent: Monday, July 23, 2001 11:50 PM
> Subject: DML: RE: stock fuel pressure
>
>
> >
> > For a 1997 5.2L: Fuel System Pressure 339 +/- 34 kPa (49.2 +/- 5
> > psi)
> >
> > -----Original Message-----
> > From: owner-dakota-truck@buffnet.net
> > [mailto:owner-dakota-truck@buffnet.net] On Behalf Of chris@slowcar.net
> > Sent: Monday, July 23, 2001 10:14 PM
> > To: dakota-truck@buffnet.net
> > Subject: DML: stock fuel pressure
> >
> >
> >
> > Anyone know what stock fuel pressure is (specifically 97 5.2l)
> > and/or what the flow capacity for the fuel pump is (at that pressure
> > or any pressure)?
> >
> > In leu of that anyone have experience with what kind of HP levels
> > the stock pump can support?
> >
> > Thanks again,
> > Chris Bennight
> >
>
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:12 EDT