RE: Spark plug heat shields

From: Ronald Wong (ron-wong@home.com)
Date: Thu Jul 26 2001 - 20:41:56 EDT


Why the lube? They're sitting in a box in my garage.

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY

-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Jack Paulson
Sent: Thursday, July 26, 2001 11:12 AM
To: dakota-truck@BUFFNET.NET
Subject: Re: DML: Spark plug heat shields

Try a very little WD-40,
After getting them off use a little anti seize lub.

--- "Ryan G." <gogglesqq@home.com> wrote:
> I know Bernd had covered this in the past but I cant
> get these things to
> budge. Using pliers i grasp them and attempt to
> twist and or pull and

=====
2000 Quad Cab 4X4-Sport V-6 Automatic Sports Plus Package
31X10.5 tires Limited Slip 3.55 Trailer Tow Group HD Package Skid Plates
Added:Airaid air filter,Flowmaster 3 chamber, Steel Horse Torneau cover,
Autolite Double Platinum 3923 Plugs, Removed air horns from Throttle Body,
new TB bolts, Taylor 8mm Wires, Cool Tape around air filter and A/C tubes,
McGard Tailgate lock, Audiovox cut off switch & hood lock
-Smyrna, Georgia



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:13 EDT