Still should blow all the gunk out of there before changing them.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Jon Smith
Sent: Thursday, July 26, 2001 6:56 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: Sparkplug heat shields
you can do that, or you can rip em out and not worry about having compressed
air when you change em :)
__________________
Jon Smith
Raleigh, NC
'95 CC 318 4x4 auto
344rwhp/424tq
----- Original Message -----
From: "jay & dana" <jay&dana@telus.net>
To: "DML" <dakota-truck@buffnet.net>
Sent: Thursday, July 26, 2001 9:11 PM
Subject: DML: Sparkplug heat shields
So if you want to keep these in and change the plugs why can't you just pull
the plug wires and give each plug inside the heat shield a couple of shots
of compressed air to clean the sh*t out before you pull the plugs?
Or won't this work and if not why?
Jay
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:13 EDT