RE: Re: damage from spinning tires

From: Ronald Wong (ron-wong@home.com)
Date: Sun Jul 29 2001 - 00:35:57 EDT


Those burrs you're talking about are your gear teeth....so smooth them out.
I want to see what spins the fastest when they do get smoothed out. ;-D

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Pukeloser@aol.com
Sent: Saturday, July 28, 2001 9:19 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re: damage from spinning tires

I disagree with all of you!

I think smokin' the tires is great for the engine and drivetrain. Matter of
fact, I'm pretty sure that a regular toasting of the tires at
way-past-redline RPM's will help the longevity of your parts by boosting the
oil pressure to a point where it really penitrates the hard to reach areas
in
you motor and tranny. Not to mention that the high rpm's act like a high
speed polisher for your gears, cleaning off unwanted burrs and smoothing out
any chipped spots. So smoke up!! its good for ya!!

John S



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:14 EDT