Re: Re: Gas gauge on the fritz

From: SEMIHEMI01@aol.com
Date: Sun Jul 29 2001 - 10:42:03 EDT

Next message: Bernd D. Ratsch: "RE: RE: MP 4bbl throttle body ?"
Previous message: kwreimer: "Re: Re: damage from spinning tires"
Maybe in reply to: kwreimer: "Re: Gas gauge on the fritz"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Dave,
Your problem has all the indications of a bad sending unit. I have found
in the past that if any moisture condenses in the unit is will corrode the
slider and the rheostat wire. This will cause the gauge to go nuts as the
level goes up or down. Bill

SEMIHEMI01@AOL.COM> KB SuperCharged, 4.7L, 2001, QC,
http://hometown.aol.com/semihemi01

Next message: Bernd D. Ratsch: "RE: RE: MP 4bbl throttle body ?"
Previous message: kwreimer: "Re: Re: damage from spinning tires"
Maybe in reply to: kwreimer: "Re: Gas gauge on the fritz"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:14 EDT