Ron,
Yeper....you were right, I put a cap on it and it's running much better.
The lights still on...it'll probally have to be reset
Thanks
Bob
Original Message:
-----------------
From: bnich@pop.bellatlantic.net bnich@impop.bellatlantic.net
Date: Sun, 12 Aug 2001 20:11:55 -0400
To: dakota-truck@buffnet.net
Subject: RE: DML: RE: RE: Small Vaccuum Port (Ron)
Ron,
Thanks, I'll plug it. When I close it off qwith my gfinger the truck stalls... but I'll put a cap,on it and see what happens.
Thanks
Bob
Original Message:
-----------------
From: Ronald Wong ron-wong@home.com
Date: Sat, 11 Aug 2001 22:26:27 -0700
To: dakota-truck@buffnet.net
Subject: DML: RE: RE: Small Vaccuum Port (greg)
Okay, you said looking at the engine, it's on the left. The right side has
two hoses, the PCV and the PB booster. The left should have a plugged
vacuum port. That plug is always falling out on people. You need to put
another one in there, then adjust your IAT adjuster correctly. That code is
based on that IAT adjuster telling the PCM that the intake air is too hot.
Adjust it down. Without that plug you're losing power.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of
bnich@pop.bellatlantic.net
Sent: Saturday, August 11, 2001 8:06 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: Small Vaccuum Port (greg)
Hey Greg,
No.....it's not the pvc....its about 1 inch below and 1" to the rear of the
pvc. Will you be going to the Rt 18 Market show tommorow?
Bob
Original Message:
-----------------
From: tmfu tmfu@home.com
Date: Sat, 11 Aug 2001 22:48:15 -0400
To: dakota-truck@buffnet.net
Subject: DML: RE: Small Vaccuum Port Help Needed
>
> Hey Guys,
> I need some help with a small vaccum port on the left side
> (looking at the motor)which looks like it takes a 1/4" hose...I
> can't find the hose....it mighta fell off. When I block it with
> my finger the truck stalls...it may be why my check engine light
> "Intake air too hot code" came up. Can anyone tell m,e where the
> hose goes?
> Thanks,
> Bob
>
Either the PCV or the Brake Booster... Probably PCV...
Greg
2K1 Neon ES
Rahway, NJ
http://24.6.89.18/Neon
24.6.89.18:6667 (IRC)
ICQ:283886
--------------------------------------------------------------------
Mail2Web - Check your email from the web at
http://www.mail2web.com/ .
--------------------------------------------------------------------
Mail2Web - Check your email from the web at
http://www.mail2web.com/ .
--------------------------------------------------------------------
Mail2Web - Check your email from the web at
http://www.mail2web.com/ .
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:24 EDT