Re: V6 vacuum line question

From: Paul Bumann (Ramsport96@home.com)
Date: Tue Aug 14 2001 - 12:49:09 EDT


out of curiosity i checked that lil port and sure enough the cap was
loose..very loose..just hangin on there..so i went to autozone got some new
vacuum caps and put one on. It went on really tight and I could definitely
feel a better idle. Should i reset the PCM?
~ Paul
98 Dak, RC,Deep Amethyst
V8/5 Speed/ 3.91 Suregrip
----- Original Message -----
From: <bernd@texas.net>
To: <dakota-truck@BUFFNET.NET>
Sent: Tuesday, August 14, 2001 4:39 AM
Subject: Re: DML: V6 vacuum line question

>
> It's an extra vacuum port. Manufacturers do that (it's not Dodge
specific).
>
> PepBoys, NAPA, AutoZone, they all carry the caps for them. If you can't
find
> one anywhere, grab a piece of vacuum hose, shove a bolt in the hose (that
fits
> tightly inside it), and then plug the vacuum leak with the vacuum hose.
>
> - Bernd
>
>
> > Thanks Bernd...byt he way...what the heck is its purpose if it is simply
> > capped??
> > I didn't find a cap....what can I use?
> >
> > Thanks man
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:25 EDT