GO TO www.truckn.com they sell them with pinion angle correction built
into the blocks. $23.00.
----- Original Message -----
From: <MrDakota95@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, August 16, 2001 9:44 PM
Subject: Re: DML: rearend drop
> In a message dated 8/16/01 3:52:37 PM Central Daylight Time,
> BlKV8Dkota@aol.com writes:
>
> <<
> I just put on centerline rims with 275/50 tires. =A0I do not like the
huge=20
> space in the back between the wheel well and the tire. =A0I want to drop
the=
> =20
> back end with drop blocks. =A0Has anyone used these? =A0I also wonder if
I s=
> hould=20
> drop it an inch or two? =A0I do not want the back to sit lower than the
fron=
> t.=20
> =A0I do not plan on dropping the front at all. =A0Also were can I buy
> these=20
> blocks from for a 98 Dakota?
>
> Josh
> >>
> I just dropped my 95 CC 3 in. rear 2 in. front you can buy the blocks at
any
> auto store or you can get them online with pinion angle already built in.
I
> got my drop springs from AIM Ind. they sell the blocks on their web site .
> www.aimind.com . I'm currently fighting my pinion angle to get it dialed
in,
> I just bought a 3 in. kit locally and wish I would have got them online
with
> the proper angle built in.
>
>
> Shawn
> MrDakota95
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:27 EDT