This might work if you have some bolt protruding out enough to weld onto.
----- Original Message -----
From: <ABeerCan@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, August 26, 2001 11:11 AM
Subject: Re: DML: exhaust manifold bolts part 2
> I give up. Try the nut and welder idea I originally posted. It works
> everytime and takes about 20 minutes total. no more stripped ez-outs. No
> more drilling and praying. All you do is hold the nut, weld it to the
broken
> bolt, then let it cool. Next use a wrench and pull the broken bolt out.
> Problem solved.
>
> The other Will
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:34 EDT