The link works fine for me. All the info is on the site.
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph "Fastdak"
~360ci, 5-spd, 8 3/4 rear / 3.90-SG
1994 Dakota 15.36 @ 91.56 mph
~318ci, 5-spd, 3.90 LS (bone stock, no mods)
----- Original Message -----
From: "David Medeiros" <orange383@earthlink.net>
To: <dakota-truck@buffnet.net>
Sent: Sunday, September 02, 2001 1:00 PM
Subject: Re: DML: Backspacing ? for 17" gen II rims
> Do you have pics or a website? I tried the site you have listed under
your
> identity tag, but it doesn't work. Have you done any suspension mods?
> What size tires are you using?
>
> David
>
>
> > [Original Message]
> > From: Mark Kuzia <flyboy01@mediaone.net>
> > To: <dakota-truck@buffnet.net>
> > Date: 9/2/01 6:07:12 AM
> > Subject: Re: DML: Backspacing ? for 17" gen II rims
> >
> > Absolutely no rubbing at all.
> >
> > Mark Kuzia
> > flyboy01@mediaone.net
> > http://people.mw.mediaone.net/flyboy01/home.html
> > 1995 Dakota 13.79 @ 102.45 mph "Fastdak"
> > ~360ci, 5-spd, 8 3/4 rear / 3.90-SG
> > 1994 Dakota 15.36 @ 91.56 mph
> > ~318ci, 5-spd, 3.90 LS (bone stock, no mods)
> >
> >
> > ----- Original Message -----
> > From: "David Medeiros" <orange383@earthlink.net>
> > To: <dakota-truck@buffnet.net>
> > Sent: Sunday, September 02, 2001 12:00 AM
> > Subject: Re: DML: Backspacing ? for 17" gen II rims
> >
> >
> > > I have 17s on my truck as well. It's not the spindle that's the
issue.
> I
> > > would be worried about the inner side of the tire hitting the frame
when
> > > lock-to-lock. Can you turn lock-to-lock with that much backspacing?
I
> > > would be surprised since my stock 94 rubs when at a full turn and I
know
> > > this is common with the GenIIs.
> > >
> > > David
> > >
> > >
> > > > [Original Message]
> > > > From: Mark Kuzia <flyboy01@mediaone.net>
> > > > To: <dakota-truck@buffnet.net>
> > > > Date: 9/1/01 9:55:54 PM
> > > > Subject: Re: DML: Backspacing ? for 17" gen II rims
> > > >
> > > > Not true, my truck is using more, with 17's, the wheels clear the
> > spindle
> > > > completely and you can use more backspacing. When you run the R/T
> > wheels,
> > > > the wheels have 6 1/2'' b.s., with that much, the wheels actually
hit
> > the
> > > > A-arms.
> > > >
> > > > Mark Kuzia
> > > > flyboy01@mediaone.net
> > > > http://people.mw.mediaone.net/flyboy01/home.html
> > > > 1995 Dakota 13.79 @ 102.45 mph "Fastdak"
> > > > ~360ci, 5-spd, 8 3/4 rear / 3.90-SG
> > > > 1994 Dakota 15.36 @ 91.56 mph
> > > > ~318ci, 5-spd, 3.90 LS (bone stock, no mods)
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "David Medeiros" <orange383@earthlink.net>
> > > > To: <dakota-truck@buffnet.net>
> > > > Sent: Saturday, September 01, 2001 9:34 PM
> > > > Subject: RE: DML: Backspacing ? for 17" gen II rims
> > > >
> > > >
> > > > > The stock wheels have a 5 1/4 backspacing. In the front, I would
> not
> > go
> > > > > any deeper than this. In the back, you could get away with
another
> > > inch,
> > > > > but I wouldn't push anymore than that.
> > > > >
> > > > > David
> > > > >
> > > > >
> > > > > > [Original Message]
> > > > > > From: <Pukeloser@aol.com>
> > > > > > To: <dakota-truck@buffnet.net>
> > > > > > Date: 9/1/01 11:32:07 AM
> > > > > > Subject: DML: Backspacing ? for 17" gen II rims
> > > > > >
> > > > > > Does anyone know what wheel width and backspacing is the max for
a
> > 95
> > > > 2wd
> > > > > dak?
> > > > > > I'm sure I can put wider wheels in the rear but I dont know what
> the
> > > > > > backspacing limits are for either the front or the rear.
> > > > > >
> > > > > > John S
> > > > > >
> > > > > > 95 cc 318 auto, transgo shift kit, HE stage II TB and intake, HE
> > 1418
> > > > > cam,
> > > > > > 1.6 Roller rockers, MSD digi6+, MSD HVC coil & 8.5 wires, Hp cap
+
> > > > rotor,
> > > > > MP
> > > > > > PCM, DT headers, Gibson exhaust (3" from headers back, no cat),
> 180
> > > > stat,
> > > > > > autolite 3923's, progear DR timing chain, auburn LSD, 4.10
gears,
> > > > > superior
> > > > > > axles, K&N X-stream filter system, MP valve covers, 24# FMS
> > injectors,
> > > > > IAT
> > > > > > adjuster
> > > > >
> > > > >
> > >
> > >
> > >
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:43 EDT