Make sure your hangers hold it out of the way of the frame and tranny.
Joints that are clamped should be welded to eliminate leaks.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of SlickEMT9854@aol.com
Sent: Monday, September 03, 2001 11:26 AM
To: aol@dakota-truck.net
Subject: DML: exhaust and header problems
I've got a 1999 Dakota SLT 4X4 5.2 ClubCab. =A0I installed Gibson headers
an=
d=20
Split rear exhaust. =A0The passenger side header hits the frame and
rattles=20
upon acceleration, and the exhaust joints leak. =A0Any suggestions how to
fi=
x=20
those probs??? =A0-Mike
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:44 EDT