http://www.rallylights.com/other/horns.htm
>From previous electrnice experience...sounds like your going to have the
relay that will go to:
1) +12 volt (battery)
2) Canister
3) Horn switch
4) Ground
http://www.ibmwr.org/r-tech/oilheads/wiringthumb.jpg
-Dakota
http://dakota2.4mg.com
----- Original Message -----
From: "Kevin (MAGNUM S/T) Hoegen" <kevinhoegen@email.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Wednesday, September 05, 2001 1:14 PM
Subject: DML: Hella triple horn set....wiring help
> To any of you who have installed an air horn kit I could use some
> assistance.
>
> I received the Hella Triple horn kit today, and I want to install it while
> keeping my existing horn in place. I'm slightly confused by the
schematics.
>
> I plan to use the Hella relay along with a fuse from the battery to the
> compressor. The part that has me confused is making the other connections
to
> the relay. I plan on having all the horn activated by the stock switch
> (steering wheel).
>
> On the enclosed schematics, I have one connection to the battery, one to
the
> compressor...but the other two I'm lost at?
>
> If you can assist me with this, it would be appreciated. I can even scan
the
> schematics if someone can dcifer them for me.
>
> Thanks again
> Kevin
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:44 EDT
