"Kevin (MAGNUM S/T) Hoegen" wrote:
> For those of you who are electrically inclined:
>
> I am in the final stages of completing my NEON light circuit. I am using a
> 12v30amp relay along with an "illuminated" rocker switch. The rocker switch
> has 3 prongs..GROUND / LOAD / POWER. Ground is obvious...and I 'think' LOAD
> should be connected to the relay's #86 prong...but what about the POWER
> prong.
You got the first and second right Power is the 12v input and needs to go to a
wire that is either hot all the time or turns off with the ign switch. (your
choice). It does not need to be a heavy wire because the relay is going to take
all the load off of the switch. I have never had the overhead console apart on
my 99 so i cant help with the rest. Just probe around the wires in there with a
12 volt test light to find what you need.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:53 EDT