Weird,
The engine builder installed the cam straight up, just like a factory
cam....but he didn't degree it...
For some reason the powerband doesn't kick in until about 2000rpm....
Wonder what would cause that...
Thanks,
Tom "Slick"
"At least it gives me time to tinker with my porsche!!!"
----- Original Message -----
From: "Wisotzkey, Rich" <Rich.Wisotzkey@gd-wts.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, October 11, 2001 8:54 AM
Subject: DML: RE: Was MD/PA/VA/WV List; Finalized, Now Hey Rich
> Hi Tom,
> Good to hear from you. I most definetly degreed the cam. It matched the
> cam card to the degree! I installed it straight up. No advance or
retard.
> Hughes has 3º advance ground into their cams.
>
> As far as the stock cam goes, I don't know. I didn't check the factory
> installation before removing it.
> Anything else I can help you with, just give a holler.
> Rich
> PS. Sorry to hear about your work situation. Vacations are nice, but
only
> when planned.
>
> -----Original Message-----
> From: Tom Slick North [mailto:prodog@swbell.net]
> Sent: Wednesday, October 10, 2001 4:12 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Was MD/PA/VA/WV List; Finalized, Now Hey Rich
>
>
> Hey Rich,
>
> The cam that I bought from you, when you put it in, did you degree it?
Do
> you remember how far off from Stock it was?
>
> Later,
> Tom "Slick"
> "Jobless again...anyone hiring???"
>
>
> <...snip>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:14 EDT