jon@dakota-truck.net wrote:
> I'm not familiar with how the shroud is attached on the GenIIIs, but
> on the GenIIs, its just a couple of clips at the top and a couple of
> standard sheet metal screws down near the bottom. If they are the same
> sort of thing as used in the GenIIs, you should be able to pick them up
> in just about any hardware store for a few cents.
There's 2 screws on each side of the shroud (4 total). I probably could
just replace them with hardware store cheapos, but I'm concerned about
stripping out existing threads. Last thing I need is a screw working loose
and being catapaulted by a spinning fan.
-- -andy andylevy@yahoo.com Maintainer, DML FAQ - http://www.dakota-truck.net/faq/ http://home.twcny.rr.com/andylevy/dakota/ '99 CC 4x4 318 auto
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:17 EDT