Thanks for the reply. I already tried the stock PCM and that threw me off
even more. It gave me a reading of 0 volts at pin 19 (ignition on, engine
off) with AND without the coil positive wire hooked up!
I also tried swithcing the ASD relay with the other ones (they all have the
same part number) and that didn't work.
1. Should I be getting a voltage reading at the coil with it hooked up?
2. What should it read? (It's at 0 with it hooked up and 3.75 volts at the
coil wire when it's not hooked up to the coil
3. Any other ideas?
Thanks
James
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:20 EDT