Pukeloser@aol.com wrote:
: Des antone know what the mopar part number is for the coolant temp sensor
: that acts as the sending unit for the gauge?
: Its the one with only one electrical lead not two.
: The guy at the dealership has the wrong one listed in his catalog and can't
: figure out the right number.
John,
Sorry about the delay getting this info to you... I thought I had
the box from the sensor I replaced in the shop, but I must have thrown
it out. :-( I did a search on Autozone's web site though, and I believe
I have the part number you need:
Manufacturer: Wells
Part number: TU165
That should be the one wire sensor (Autozone calls it a "temperature
switch". The part number for the 2 wire sensor is SU381.
That might not help you at the Mopar parts counter, but armed with the
above info, you should be able to go into just about any auto parts store
and pick one up. The cost at Autozone for the 1 wire is $7, its $10 for
the two wire.
Good luck!
---Jon-
.---- Jon Steiger ------ jon@dakota-truck.net or jon@jonsteiger.com -----. | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot - SEL | | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96 FireFly | `----------------------------------------- http://www.jonsteiger.com ----'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:21 EDT