So the Mopar Shop Manual is essentially telling you that even if you
have heat cracks and hot spots to leave it alone and ruin a new clutch
disc.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of greg conner
Sent: Tuesday, October 23, 2001 4:55 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re: RE: Clutch Replacement Questions?
In my mopar shop manuel it states not to under any circumstances to
resurface the flywheel. I just cleaned it up real well. The dual
friction
I put in has good holding power, but the clutch pedal feels like a
freaking
import mow. The clutch petal with the stock clutch in my 96 is allmost
3x
as stiff as the 93 with the dual friction set up
Greg Conner
1993 RC Dakota Sport
3.9L 5speed
15.4 @89
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:21 EDT