Re: RE: TPS mod done....but have a question

From: Psychosis (psychosis@darkhawk.net)
Date: Fri Oct 26 2001 - 19:34:51 EDT


aha..that was my next question Bernd...thnx. I kinda hate to luv this 1991
V8 Dak. Its so hard to find some parts in stock because it is in a class by
itself. Everything out there is for magnum engines. Oh well.

Thanks,
Psychosis

----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@BUFFNET.NET>
Sent: Friday, October 26, 2001 7:10 PM
Subject: DML: RE: TPS mod done....but have a question

>
> You probably have a TBI unit instead of the MPI system from the '92 on
> up vehicles. The mod doesn't apply to the '91 and older models due to
> this. The '91 TPS range is from 1v to 4v.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Psychosis
> Subject: DML: TPS mod done....but have a question
>
>
> Ok, I did the TPS mod on my 1991 V8 Dak. Voltage at middle wire was
> 1.08 before doing anything. After i drilled out the bushings i could
> get it down to .86 and no lower. After tightening i started truck and
> didn't touch gas pedal like it said, let it run a minute then shut it
> off. I then started it back after about 20 secs and drove it. I really
> couldn't tell much diff. but heres the weird part. After i got back i
> shut the truck off, turned switch to on and measured voltage again....it
> was back at 1.08!?!?! Now why is the voltage back like it was because i
> know the sensor never moved. Any ideas?
>
> Psychosis
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:22 EDT