I bet the connectors are the same as most fuel line and AC (lots of ferds
have them) connectors. If it is, most parts stores have these tools: look
for a fuel line/ac disconnect tool set. Shouldnt cost much more than 10
bucks.
Boog
----- Original Message -----
From: "Bill Knight" <wknight40@home.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Saturday, October 27, 2001 4:45 PM
Subject: DML: Transmission fluid change
> Went to a Texaco Express Lube to have fluids done. Everything went well
> until they tried to do the tranny fluid. For some reason they could not
get
> the lines disconnected to hook up the machine. They spent about 30-40
> minutes trying and the lines just would not release. They admittedlly
quit
> before the broke anything, which was very kind of them. Anyone have any
> ideas of getting thes linse to come apart. They look like the kind that
> either squeeze to remove or two small bladed screw drivers inserted on
> either side for removal. The vehicle is a 97 Dakota SLT with the V6. TIA
> Bill Savannah, GA
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:22 EDT