The A/C compressor route is an excellent way to do it...but for
liability reasons...not feasible.
- Bernd
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Tim Berry
Sent: Wednesday, November 07, 2001 7:54 PM
To: dakota-truck@BUFFNET.NET
Subject: DML: Re: RE: Powerdyne Intercooler/Heat Exchanger
Is the power gain enough to outweigh the power required to turn the AC
compressor? Plus, you're not allowed to "Drip" at the track if ya know
what I mean... ;)
Tim Berry - 97 CC SLT 318 4x2
13.504@101.91 w/ Powerdyne @ 8PSI
Vortech S-Trim 10PSI - Installed
> Reroute the A/C coolant line inside the intake (in and out) and then
> see a dramatic drop in air temp.
> --------------------------------------
> Steven St.Laurent
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:28 EDT