That or the proportioning valve.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of David Carmany
Sent: Thursday, November 08, 2001 2:48 PM
To: dakota-truck@buffnet.net
Subject: DML: Brake master cylinder failing?
I just noticed this today while sitting at a light. If I push on my
brake pedal and then letoff a little bit and press down again and keep
doing this I can get my brake pedal to the floor. I am guessing that
this is not good. After noticing this I applied "some significant"
pressure to my brakes and my pedal will become soft feeling. If I let it
come back up every thing is fine again. Under a constant medium pressure
the pedal does not become soft.. Am I correct in assuming that my brake
master cylinder is failing? I have checked my brake fluid and it is
full. (and no I havent messed with the brakes since I bought it.)
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:28 EDT