as long as yur lamps hold up....I got the kit and them wound up to replace
the lamps with an aftermarket product for $50.
http://www.vehiclelighting.com/detail-fog-round.asp It took a little carving
of the lamp holder brackets..but di get them to work.
""kwreimer"" <kwreimer@msn.com> wrote in message
news:00a701c176d7$4b73a1c0$6fff153f@pavilion...
> I purchased the kit today from the dealer, 140.00 out the door, and here
is
> a strange thing.. If I was to replace the 4 inch lamp it will cost 113.00
> what a joke, you might as well buy a new kit and get an extra lamp and the
> wiring ,etc.. The instructions are nice, thanx for the Help..
> ----- Original Message -----
> From: "Gary Bower" <gwbower@hotmail.com>
> To: <dakota-truck-moderator@bent.twistedbits.net>
> Sent: Sunday, November 25, 2001 2:58 PM
> Subject: DML: Re: fog lamp install ques?
>
>
> > If I remember correctly,the wire loom in the location you described is
for
> > the headlamps. The connectors you use with the foglamps are "up" in the
> > engine compartment(the under hood fusebox). Installl was fairly simple,
> but
> > I suppose this is somewhat subjective.....Ther are not wires to cut or
> > splice......kit comes with godd set of printed instructions.........
> >
> > ""kwreimer"" <kwreimer@msn.com> wrote in message
> > news:003301c175cb$9f2caa80$e0fd153f@pavilion...
> > > Ok I need to know this befor I order lights, I drilled the plugs out
for
> > the
> > > 4 inch factory lamps on my Dak, now when i look down past the radiator
> > with
> > > the hood up of course,what is that wire loom attached to the frame
rail
> by
> > > the lwr radiator, driver side? is this the power loom that taps into
the
> > > light kit loom i will be buying? Has anybody installed this factory
lamp
> > kit
> > > after drilling out the plug holes in the dam.is it easy to install
this
> > kit,
> > > seems to me it would be if this loom i am asking about is the power
> loom.
> > > Please advise.Thanx
> > >
> >
> >
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:34 EDT