I purchased the kit today from the dealer, 140.00 out the door, and here is
a strange thing.. If I was to replace the 4 inch lamp it will cost 113.00
what a joke, you might as well buy a new kit and get an extra lamp and the
wiring ,etc.. The instructions are nice, thanx for the Help..
----- Original Message -----
From: "Gary Bower" <gwbower@hotmail.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Sunday, November 25, 2001 2:58 PM
Subject: DML: Re: fog lamp install ques?
> If I remember correctly,the wire loom in the location you described is for
> the headlamps. The connectors you use with the foglamps are "up" in the
> engine compartment(the under hood fusebox). Installl was fairly simple,
but
> I suppose this is somewhat subjective.....Ther are not wires to cut or
> splice......kit comes with godd set of printed instructions.........
>
> ""kwreimer"" <kwreimer@msn.com> wrote in message
> news:003301c175cb$9f2caa80$e0fd153f@pavilion...
> > Ok I need to know this befor I order lights, I drilled the plugs out for
> the
> > 4 inch factory lamps on my Dak, now when i look down past the radiator
> with
> > the hood up of course,what is that wire loom attached to the frame rail
by
> > the lwr radiator, driver side? is this the power loom that taps into the
> > light kit loom i will be buying? Has anybody installed this factory lamp
> kit
> > after drilling out the plug holes in the dam.is it easy to install this
> kit,
> > seems to me it would be if this loom i am asking about is the power
loom.
> > Please advise.Thanx
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:34 EDT