You may also want to check with Kammer Racing on the .512/.512 camshaft.
http://www.kammerracing.com
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of
Anthony_Gonatas@ars.aon.com
Sent: Friday, December 07, 2001 10:00 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: RE: Stainless Steel Roller Rocker Question
Does this look right?
Just Guessing
STOCK MAGNUM CAM .410/.417 LIFT .050
DURATION
204/211 LOBE ?
STOCK MAGNUM CAM W/1.7RR .440/.447 LIFT .050 DURATION 204/211
LOBE ?
R/T MAGNUM CAM .458/.467 LIFT .005
DURATION 260/264 LOBE ?
KRC 206 1500-5300RPM ?? .480/.512 LIFT .050
DURATION
206/210 LOBE 112
HUGES HER0814AL 1800-5500RPM .512/.520 LIFT .050 DURATION 208/214
LOBE114
The Huges cam looks like a good cam for my 2001 R/T What do you think?
I'm no expert but from what I can tell, Lift gives your Power, Duration
give you RPM range and lobe widens the powerband and effects your idle.
Correct me if I'm wrong.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:40 EDT