I've been using the white pvc for over a year w/ no problems. Use Sch 26 or
better, the thin stuff won't handle the heat/suction. As long as the clamp
fits it'll work.
Patrick Delgado
> From: Eric Giblock <egiblock@hotmail.com>
> Organization: Twisted Bits Internet Services
> Reply-To: dakota-truck@buffnet.net
> Date: Sun, 16 Dec 2001 23:25:46 -0600
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: homebrew intake.. need some help here.
>
> hi,
>
> a couple of months ago (6/2/01) i got instructions on how to make a homebrew
> intake for my 99 3.9v6 dakota. for the indegredients i have the following
> list:
> 1 - 10" piece of 3" BLACK PVC (abs) pipe
> 1 - 3" 45degree adaptor
> 1 - small can of ABS cement
> 2 - Dual Clamp (2 tightners on it) with rubber insert
> 1 - can of matte black high temp spray paint
> 1 - materials to make a bracket to hold it in..
>
> 1 problem i ran into at Home Depot when i went to get the parts....
> 1. they dont sell 3" BLACK ABS PVC pipe anymore they just have the white
> pipe.
>
> another possible problem is that the dual clamp for the tubing was plumber
> tubing. is this the right stuff ??
>
> anyways, anyone know where i can get 3" black abs pvc pipe ?? or anyone
> know/have a different way of making a simple homebrew intake ?
>
> let me know here or at egiblock@runbox.com
>
> thanks
>
>
> --
> --
> eric giblock
> student / webdesigner
> www.gibsdakota.com
> egiblock@hotmail.com
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:42 EDT