Roll the fenders, get smaller width tires or buy new wheels with a different
offset. I would try to roll the fenders first. Take a body hammer and tap
the lip till it is rolled up, but be careful not to warp the outer panel.
Steven
http://www.smokin-graphics.com
http://www.smokindakota.com
http://www.soundofprestige.com
ICQ 42763370
AOL IM - SMKNDAKTRK
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Kevin
Sent: Tuesday, February 05, 2002 5:09 AM
To: dakota-truck@buffnet.net
Subject: DML: 18" wheel install
Need some help! I got my 18" moda R7 wheels with 255/55/18 tires, and they
do not fit on my lowered Dak. The truck is lowered 2/3, and they will fit in
from with modest fender well mods, but they will not fit in the back. I am
sure they will hit the fender on the first bump. I need to know what I could
do to fix the problem. Is it possible to adjust backspacing or will I have
to roll the fenders. BTW the truck is a 1995 Gen II. Thanks for any advice
in advance!
Kevin E. Smith
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:57 EDT