Huh?
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Scott Quaranta
Sent: Wednesday, February 06, 2002 6:23 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Quickor Swaybars installed
Hey Bernd,
Maybe you can stop by and visit
Scott Q
> From: "Bernd D. Ratsch" <bernd@texas.net>
> Reply-To: dakota-truck@buffnet.net
> Date: Wed, 06 Feb 2002 18:01:42 -0600
> To: dakota-truck@buffnet.net
> Subject: DML: Quickor Swaybars installed
>
>
> WOW! Nice bars and the installation is very simple. Handles much
> better than with the R/T bars. (BTW: I was using a 32mm bar on the
> front from a '01 R/T which are hollow. The Quickor is a 32mm solid
> bar. The front leaning problem under higher speed turning is greatly
> improved
> now.) - I'll need a new thread for this.
>
> I'll need to test them out a bit more for Quickor but will be
> available after the local shop opens up - pricing to follow (much less
> than Hotchkis though).
>
> I'm also now a dealer for Stillen which includes Cross-Drilled/Slotted
> rotors, rear disc conversion kits, and complete braking system upgrade
> (AP 6-piston calipers included for the front and PBR single piston
> calipers on the rear - 1997-2001 Dakota including R/T's). :) The
> webpage will be going up for that after tomorrow.
>
> "Project ATI R/T" will be receiving the brake system upgrade and will
> be installed while I'm in CA from the 15th-19th. We'll have pictures
> and a full report after I get back.
>
> - Bernd
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:58 EDT