Be ready for a challenge. http://www.dakota-truck.net/FAQ/Transmission_and_Gears/5_speed_swap.html
"greg conner" <dodgeboy93@hotmail.com> wrote:
> Has anyone converted their auto tranny dak to a manuel set up? We are
> thinking about trying this on a friends 97 v6 auto dak. He has in his
> possesion a ax-15 tranny, complete clutch linkage, master and slave
> cylinders, pedals, shifter, and drive shaft from a 93 dakota. I figure the
> driveshaft wont work due to the spline count in the gen3's rear being
> different. But will everything else? We also have the tranny crossmember
> from a 93 but havent taken the measurements to see if it would work or not.
> I figure the pcm from the auto will be ok for the time being, it just may
> throw a few codes since ic cant detect the tranny. What about the speed
> sensors and such? Will the switch over to the ax-15 or will we need to get
> new ones. This is just in the planning stages right now..trying to figure
> out hom much work it will be. Any input is appreciated
> Thanks
> greg
> _________________________________________________________________
> Chat with friends online, try MSN Messenger: http://messenger.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:06 EDT