Re: belltech

From: Punch (2punch.crash2000@AHM.com)
Date: Thu Mar 28 2002 - 22:12:20 EST


""Esler, Joel"" <joel.esler@us.army.mil> wrote in message
news:IPEEJFLADOGIHCGFJNEBOEHOCHAA.joel.esler@us.army.mil...
>
> Who is familiar with Dropping a truck using the Belltech suspension? I
know
> pieces of the Belltech suspension are on my truck, but whoever didn't do
the
> whole thing, the back sits lower than the frunt which leads me to believe
> that whoever had it be4 me didn't drop the phrunt. I see the belltech
> brakets on the front of the leaf springs, and the mouting braket on the
rear
> of the leaf spring, but no drop bracket, (the piece that looks like an A
> with a whole bunch of holes in it, belltech's is about 4 in long...) and
> the belltech shocks, however, can someone tell me where to look on the
front
> to see if the front has belltech drop spindles or springs? I need to get
> these, but I need to know what i need to get, seeing as how whoever did it
> before me did it half ass.
>
> joel
>

silly question Joel, you would look at the front end at the spindles and
springs duh! : )



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:14 EDT