> Maybe the Hughes 2228 cam but I don't know how the computer will >
react to the duration.
It will work just fine with a 360, a 408 will make the cam act "smaller"
since it requires that much more air for everything, including idle. What
you will need will be a set FMS 30# injectors. The Mopar PCM will work, but
a custom burn will be better. Fire up the engine with the Mopar to avoid any
problems with getting the new engine started. Sam uses the 1828 and his 360
is a torque MONSTER! You will have serious traction problems with the 408...
Mark Kuzia
Mark's Diecast Inc.
flyboy01@comcast.net
1995 Dakota 13.79 @ 102.45 mph "Fastdak"
~Supercharged 360ci, 5-spd, 8 3/4 rear / 3.90-SG
1994 Dakota 15.36 @ 91.56 mph
~318ci, 5-spd, 3.90 LS (bone stock, no mods)
----- Original Message -----
From: <Pukeloser@aol.com>
To: <dakota-truck@dakota-truck.net>
Sent: Friday, March 29, 2002 6:46 PM
Subject: DML: max cam duration for computer?
>
> Hey all,
>
> Does anyone know, what is the hottest cam I can run that will be
compatible
> with the computer on my 95 dak? I am doing a 360 or 408 project this
summer
> (which one depends on funds). I know there are several people who are
running
> the hughes 1828 cam with success but I'd like to go with more if possible.
> Maybe the hughes 2228 cam but I dont know how the computer will react to
the
> duration.
>
> Any guesses?
>
> John S
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:14 EDT