Re: Re: Drag Skinnys (rims) Gen III

From: TonyC (acellan1@tampabay.rr.com)
Date: Tue Apr 02 2002 - 00:14:54 EST


Its for my streeter, eventually moving over to the 98 RC 408 project. So I
really don't feel like going to the trouble. I figure if I can get the 6 on
4.5s I can swap them around at will. Thanks for the info.
BTW: Nice truck.
TonyC
http://www.dragtruk.com/ENTRIES/7042YUL2QEG8.html sorry no pic

-----Original Message-----
From: Ray Block <bpracing@worldnet.att.net>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Tuesday, April 02, 2002 12:00 AM
Subject: DML: Re: Drag Skinnys (rims) Gen III

>
>
>----- Original Message -----
>From: "TonyC" <acellan1@tampabay.rr.com>
>To: "DML" <dakota-truck@dakota-truck.net>
>Sent: Monday, April 01, 2002 11:03 PM
>Subject: DML: Drag Skinnys (rims) Gen III
>
>
>>
>> Anyone know which wheel companies make a 15x3.5-5.5 rim to fit a GenIII?
>> weblinks or pics appreciated.
>> TonyC
>>
>Far as I know, no one makes that size for the 6 lug on 4.5 in bolt circle
on
>Daks. If you really want to run that size wheel, consider having the
rotors
>plugged and redrilled on a 5 lug 4.5 in bolt circle. Moser Engineering
>will do both rotors for $75. http://www.moserengineering.com/
>
>Then you have several options. Check out Weld Racing.
>http://www.weldracing.com/ProStar.html
>
>Anyway, that's how I did mine and I'm happy with it. Hope this helps.
>
>Ray
>"I used to have a handle on life, but it broke."
>http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:18 EDT