screws (phillips), plan on crawling on top of your engine. The space is
tight. Easiest to undo the driver side wires, flip the cap over to the pass
side, put new cap on, reinstall driver wires, then pass wires. that way
you're not trying to figure out 8 wires at once, just the 4 at a time.
TonyC
-----Original Message-----
From: Punch <2punch.crash2000@AHM.com>
To: dakota-truck-moderator@bent.twistedbits.net
<dakota-truck-moderator@bent.twistedbits.net>
Date: Tuesday, April 02, 2002 5:29 PM
Subject: DML: question on cap and rotors
>
>will be changing my cap and rotor, anything I need to know for a smooth
>install?
>
>is it screwed down, or clips?
>--
>***************************************************************************
*
>**
>98 Dakota,CC,V6,Homebrew,DynoMax Cat-Back,3923's,Kenwood KDC-MPV619 MP3
>Player,BFG-KO's.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:18 EDT