Awesome link Andy. I forwarded this to my buddy and he is going to check it
out... it sounds like it might be it.
Thanks!
Travis aka Blue Travis
00 IB CC R/T
p.s. We knew it wasn't the TB or sensors since we just replaced his stock TB
with a F&B and we cleaned all the sensors at that time... I forgot to
mention that in my original email.
Date: Thu, 4 Apr 2002 13:14:34 -0500
From: "Andy Levy" <andylevy@yahoo.com>
Subject: DML: Re: Re: RE: Gen II Stalling Problem
http://www.dakota-truck.net/DMLFAQ/Electronics/gen2_stalling.html
""Dave"" <ded74@yahoo.com> wrote in message
news:a8i142$7ed$1@bent.twistedbits.net...
>
> I don't know if it's the same thing, but it sounds like what was happening
> to my GenII last year, turned out to be faulty wiring to/from the pcm,
might
> want to take a look at that. We did everything you've done, cap/rotor,
> coil, plugs, wires, finally gave up and took it to a friend's shop, when
> they found the problem, had it rewired, no problems since.
>
> --
> Dave
> Bensalem, PA
> '93 Sport 4x4 V-6
>
> ""Ronald Wong"" <ron-wong@cox.net> wrote in message
> news:NDBBIHDGKKJOIJDEOCBMIEPGFIAA.ron-wong@cox.net...
> >
> > Clean the TB and sensors. Clean the injectors.
> >
> > Ron
> > 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> > For modifications see my DML Profile (URL follows)
> > http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:19 EDT