i just replaced my plugs less than a week ago... gapped them at .040.
should i regap to .038?
Gary Hedlin
""Bernd D. Ratsch"" <bernd@texas.net> wrote in message
news:000401c1e036$1aaf81d0$090aa8c0@homenet.com...
>
>
> Use the 3923's at .038" gap. They're more than plenty. On the TQ, turn
> them until they're snug and give'em a quick jerk.
>
> I was running 3923's with 10# boost and a 40HP shot...no problems.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of taylor9565
> Sent: Tuesday, April 09, 2002 9:14 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: spark plug gap and torque spec recomendation?
>
>
>
> V6 Magnum with a powerdyne supercharger, 3922
> AUTOLITES, would .040" stock gap setting be ok?
> and what should I torque the plugs to?
>
> Ron-
> 2001 Dakota Sport R/C bright silver met
> http://www.twistedbits.net/WWWProfile/dakota/K12X33hlXkiTk
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:21 EDT