Motor mounts are fairly easy,, if easy to access, most can access easily. if
a shop did it,not the dealer just a shop, about 150.00 TTL dealer more like
200.00. parts alone 50.00 aftermarket mounts by Borg Warner..
----- Original Message -----
From: Brett Forehand <brett4hand@hotmail.com>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, April 16, 2002 3:21 PM
Subject: DML: Autolites and Motor Mounts!
>
>
> Ok gang, so I'm finally replacing my Autolite 3923's today (the old one's
> looked good...just worn out), plus new Borg Warner cap and rotor, and I
look
> down to see there is a wear mark on my overflow bottle for coolant. Sure
> enough, it looks like the motor is cranking to the right, and causing the
> alternator pulley to rub on the overflow bottle.
>
> I'm figuring the motor mounts are worn out, and wondering what they cost
to
> have replaced? I've got 132k on my Dak, so I'm sure it's time to have it
> done. Any ball park figures out there? Is this a do-able do-it-yourself
> project?
>
> BTW, the truck is running strong now with the new plugs... can't wait to
put
> the MSD wires in. They don't fit the factory looms, so I bought some
Moroso
> looms this afternoon).
>
> Later!
>
> Brett Forehand
> '94 Dakota CC Sportin' new plugs, rotor, cap, soon to have MSD 8.5's, and
> TonyC's IAT adjuster (are ya readin' this, Tony?)
>
>
> _________________________________________________________________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:22 EDT