Re: Gen II body work

From: Andy Levy (andylevy@yahoo.com)
Date: Thu Apr 18 2002 - 23:14:45 EDT


Last I knew, Jason was in Rochester, NY. Where are you Greg? I'm headed
to Foxwoods next weekend and live in Syracuse - if you're out that way and
things line up for everyone, I'd be willing to haul the parts.

greg conner wrote:

>
> where are ya located Jason? I just so happen to have a set of gen 2 doors
> and a gen 2 bed and tailgate to get rid of. I just finished all the body
> work on my 96 dakota and it will get painted graphite metallic next
> saturday. I can give ya a few hints on body work.. I think chris carlton
> is and actual body man though, he may have some more info for ya. His
> wife and his site is cruznlo.com
>
>
>>From: "Jason Mooberry" <spam@milketoast.com>
>>Reply-To: dakota-truck@dakota-truck.net
>>To: dakota-truck-moderator@bent.twistedbits.net
>>Subject: DML: Gen II body work
>>Date: Thu, 18 Apr 2002 20:42:02 -0400
>>
>>My '94 is starting to rust pretty bad in the front quarters under the
>>headlight assembly and on the inside bottom of the doors. Last summer I
>>sanded all the rust off, coated with a rust inhibitor, and primed... but
>>that only slowed the advance, unfortunately. Also, the paint is starting
>>to
>>flake here and there on the same panels. So anyway, to get to the
>>question.... what's the recommended course of action? I've never done
>>much
>>body work. I was thinking I'd just get replacement panels and have them
>>painted to match. But I don't have a clue what to do about the doors, as
>>it's not as easy to buy a pair of doors to do the same. Thanks for any
>>help.
>>
>>Jason Mooberry
>>^lifted^ '94 V6 SLT 4x4 5spd

-- 
-andy
andylevy@yahoo.com
Maintainer, DML FAQ - http://www.dakota-truck.net/faq/
http://home.twcny.rr.com/andylevy/dakota/
'99 CC 4x4 318 auto



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:22 EDT