Solve that with a big bright sticker that says "DO NOT FLASH"
TonyC
-----Original Message-----
From: William H. Hiatt III <william@hiatt.net>
To: dakota-truck@dakota-truck.net <dakota-truck@dakota-truck.net>
Date: Wednesday, April 24, 2002 4:00 PM
Subject: DML: Re: Custom Flash Question
>
>Most likely not. If they look at let's say, you're timing, they might go
>"Wow, that's high!", but other than that, they wouldn't know. There are so
>many different flashes for the PCM's where the timing is changing all the
>time, along with other stuff, they really don't know. Worst case scenario,
>the dealer reflashes your PCM, and you have to get it reflashed by Kenne
>Bell, Leach, BG Chrysler, etc.
>
>william
>----- Original Message -----
>From: <B1LLYW@aol.com>
>To: <dml@dakota-truck.net>
>Sent: Wednesday, April 24, 2002 12:23 PM
>Subject: DML: Custom Flash Question
>
>
>>
>> If get a custom flash from say, BG Chrysler or Kenne Bell, will the
dealer
>> know? In other words, if I have to go in for service and they plug into
>the
>> PCM to check codes and such, will they be able to tell that the
>programming
>> has been modified?
>>
>> Bill White - http://www.moparforme.com
>> '02 QC 4x4, SLT+, 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single
>Exhaust
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:25 EDT