1) Jack up front end and remove the wheels.
2) Remove caliper with allen wrench and remove old pads by pulling them out.
3) Remove retaining clips from wheel lugs - pliers work great!
4) Pull rotor off
5) Put new rotor on, place new pads in caliper, bolt caliper on, bolt wheel
on, lower vehicle.
I did both sides on my truck in less than 1 hour.
John
http://jndneff.home.texas.net/dakota/dakota.html
<http://jndneff.home.texas.net/dakota/dakota.html>
>My parent's 4X4 durango needs to have new rotors. I
>was wondering what's involved in doing a job like
>this. Is it pretty much a DIY job?
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:26 EDT