They are.
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Stlaurent Mr
Steven
Sent: Monday, April 29, 2002 7:20 AM
To: 'dakota-truck@dakota-truck.net'
Subject: RE: DML: 4.7l Cam Opinions
Sounds like the cams in the HO version (Jeep).
--------------------------------------
Steven St.Laurent
C4i System Engineer
C4i Engineering Branch, PSD, MCTSSA
MARCORSYSCOM, U.S. Marine Corps
Office (760) 725-2506 (DSN Prefix: 365)
"Never be content with somebody else definition
of you. Instead, define yourself by your own beliefs,
your own truths, your own understanding of who
you are. Never be content until you are happy with
the unique person GOD has created you to be."
-----Original Message-----
From: B1LLYW@aol.com [mailto:B1LLYW@aol.com]
Sent: Monday, April 29, 2002 6:04 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: 4.7l Cam Opinions
In a message dated 4/29/2002 8:24:01 AM Eastern Daylight Time,
mopar287@yahoo.com writes:
<<<Saw this on the KRC Performance page. Any Opinions???
http://www.krcperformance.com/krc_performance_47.htm>>
I already ordered a set of cams from Marty at KRC. Peak numbers are
nice but the most impressive thing for me is making at least 20 lb-ft of
torque across the whole band.
Bill White - http://www.moparforme.com
'02 QC 4x4, SLT+, 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single
Exhaust, Hurst T-Handle, BFG A/T's, IAS Shocks, 180 t-stat
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:26 EDT