I'd hold off a bit if you could. Jonas is working on some, well, let's just
say, "nice" cams for our motors ;).
william
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@dakota-truck.net>
Sent: Monday, April 29, 2002 7:35 AM
Subject: RE: DML: 4.7l Cam Opinions
>
> They are.
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Stlaurent Mr
> Steven
> Sent: Monday, April 29, 2002 7:20 AM
> To: 'dakota-truck@dakota-truck.net'
> Subject: RE: DML: 4.7l Cam Opinions
>
>
>
> Sounds like the cams in the HO version (Jeep).
>
> --------------------------------------
> Steven St.Laurent
> C4i System Engineer
> C4i Engineering Branch, PSD, MCTSSA
> MARCORSYSCOM, U.S. Marine Corps
> Office (760) 725-2506 (DSN Prefix: 365)
> "Never be content with somebody else definition
> of you. Instead, define yourself by your own beliefs,
> your own truths, your own understanding of who
> you are. Never be content until you are happy with
> the unique person GOD has created you to be."
>
> -----Original Message-----
> From: B1LLYW@aol.com [mailto:B1LLYW@aol.com]
> Sent: Monday, April 29, 2002 6:04 AM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: 4.7l Cam Opinions
>
>
> In a message dated 4/29/2002 8:24:01 AM Eastern Daylight Time,
> mopar287@yahoo.com writes:
>
> <<<Saw this on the KRC Performance page. Any Opinions???
>
> http://www.krcperformance.com/krc_performance_47.htm>>
>
> I already ordered a set of cams from Marty at KRC. Peak numbers are
> nice but the most impressive thing for me is making at least 20 lb-ft of
> torque across the whole band.
>
> Bill White - http://www.moparforme.com
> '02 QC 4x4, SLT+, 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single
> Exhaust, Hurst T-Handle, BFG A/T's, IAS Shocks, 180 t-stat
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:26 EDT