Remember, after talking to the engine designer (thanks to Matt), the heads
were reworked to accomadate the new cam profile.
--------------------------------------
Steven St.Laurent
C4i System Engineer
C4i Engineering Branch, PSD, MCTSSA
MARCORSYSCOM, U.S. Marine Corps
Office (760) 725-2506 (DSN Prefix: 365)
"Never be content with somebody else definition
of you. Instead, define yourself by your own beliefs,
your own truths, your own understanding of who
you are. Never be content until you are happy with
the unique person GOD has created you to be."
-----Original Message-----
From: William H. Hiatt III [mailto:william@hiatt.net]
Sent: Monday, April 29, 2002 6:45 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: 4.7l Cam Opinions
I'd hold off a bit if you could. Jonas is working on some, well, let's just
say, "nice" cams for our motors ;).
william
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@dakota-truck.net>
Sent: Monday, April 29, 2002 7:35 AM
Subject: RE: DML: 4.7l Cam Opinions
>
> They are.
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Stlaurent Mr
> Steven
> Sent: Monday, April 29, 2002 7:20 AM
> To: 'dakota-truck@dakota-truck.net'
> Subject: RE: DML: 4.7l Cam Opinions
>
>
>
> Sounds like the cams in the HO version (Jeep).
>
> --------------------------------------
> Steven St.Laurent
> C4i System Engineer
> C4i Engineering Branch, PSD, MCTSSA
> MARCORSYSCOM, U.S. Marine Corps
> Office (760) 725-2506 (DSN Prefix: 365)
> "Never be content with somebody else definition
> of you. Instead, define yourself by your own beliefs,
> your own truths, your own understanding of who
> you are. Never be content until you are happy with
> the unique person GOD has created you to be."
>
> -----Original Message-----
> From: B1LLYW@aol.com [mailto:B1LLYW@aol.com]
> Sent: Monday, April 29, 2002 6:04 AM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: 4.7l Cam Opinions
>
>
> In a message dated 4/29/2002 8:24:01 AM Eastern Daylight Time,
> mopar287@yahoo.com writes:
>
> <<<Saw this on the KRC Performance page. Any Opinions???
>
> http://www.krcperformance.com/krc_performance_47.htm>>
>
> I already ordered a set of cams from Marty at KRC. Peak numbers are
> nice but the most impressive thing for me is making at least 20 lb-ft of
> torque across the whole band.
>
> Bill White - http://www.moparforme.com
> '02 QC 4x4, SLT+, 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single
> Exhaust, Hurst T-Handle, BFG A/T's, IAS Shocks, 180 t-stat
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:26 EDT