Summit sells the same value covers for 169.99/pair. I just bought some used
for 75, and thought I was getting a good deal. The MP covers don't have
baffles unlike the stockers, but that is good because it will allow you to
use higher ratio (1.7) rockers or a bigger cam in the future without
worrying about clearance problems.
If the pcv grommet is worn out on these covers (i think thats what he's
talking about), you can pick them up a new grommet from summit for $4.95
under part # DCC-5249642.
I would recommend picking up a set of new mopar performance gaskets (Summit
#DCC-5249660) they are 15.95 and are really nice quality. You can re-use
them over and over again as they are a rubber-coated metal gasket.
-Nelson
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Dave
Sent: Monday, May 20, 2002 11:41 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Re: RE: Re: RE: tips on installing 50mm TB...MP valve
covers for sale
How much do they normally run? And what's the deal with the baffles? Do I
need baffles under the pcv valve? I hate sounding dumb, but I'm new to this
stuff :) Thanks.
-Dave
""Nelson Colwell"" <nelson@neltec.com> wrote in message
news:AHEAIKLKMFLPPBIJAELJIEKECEAA.nelson@neltec.com...
>
> Dave, they'll fit. A new oil cap will probably fix it. If i didn't already
> have a set, i'd buy them from him for $50.
>
> -Nelson C
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Dave
> Sent: Monday, May 20, 2002 11:16 AM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: DML: Re: RE: tips on installing 50mm TB...MP valve covers for
> sale
>
>
>
> Will those fit my 360? So no idea why they're leaking? Need new caps
> maybe?
>
> -Dave
>
> <Quiktruk99@aol.com> wrote in message news:95.1cbe7d35.2a1a4ba4@aol.com...
> >
> > Dave,
> > If you're interested, I have a set of the polished MP Magnum valve
covers
> off
> > my 99 318, they need a little more "polish" to make 'em shine. I
couldn't
> get
> > the filler caps to stop leaking, so I took 'em off. They have baffles
> under
> > the filler caps, but not under the pcv valve holes. Yours for $50
shipped
> if
> > you want 'em.
> >
> > Kevin / NJ
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:35 EDT