i just replaced all my balljoints, pretty damn easy to do if u have an air
chisel. i also just had energy suspenion urethane bushings installed. the
were fine for a week, until one fell out. doubt it had anything to do with
the bushing since it was reinstalled and is fine. ride seems tighter, no
more squeaks, thats a +. check ur tie rod ends as well, ive already
replaced one.
mike t
>From: "TonyC" <acellan1@tampabay.rr.com>
>Reply-To: dakota-truck@dakota-truck.net
>To: <dakota-truck@dakota-truck.net>
>Subject: DML: Re: Ball joints
>Date: Thu, 23 May 2002 16:59:52 -0400
>
>
>It might be worthwhile to do the control arm bushings as well.
>Polyurethane
>would be the way to go if they're available.
>TonyC
>
>-----Original Message-----
>From: MAGNUM S/T <khoegen@charter.net>
>To: dakota-truck-moderator@bent.twistedbits.net
><dakota-truck-moderator@bent.twistedbits.net>
>Date: Thursday, May 23, 2002 4:32 PM
>Subject: DML: Ball joints
>
>
> >
> >I had the Dak inspected today and ound the problem with my front end. I
>was
> >told the left lower ball joint and possibly the right upper ball joints
>need
> >replacement.
> >
> >I am taking the approach of replacing stock items with performance
>whenever
> >appropriate. I would like to replace left and right Upper and Lower ball
> >joints with PERFORMANCE ball joints. Does anyone know where, who and what
>I
> >should go with??
> >
> >Additionally....I will be paying labor for someone to do the work....are
> >there any other things I should have done at the same time while they are
>in
> >there?? I have a 99 Dakota 5-speed V6 2WD with all stock steering
> >components.
> >
> >Thanks in Advance all!
> >
> >--
> >Kevin
> >http://webpages.charter.net/khoegen
> >Home of the "MAGNUM S/T"
> >
> >
> >
> >
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:35 EDT