Actually,
Marty at KRC did it for me.
(Using 1.5:1 Rockers - Grind Specs)
.472"/.480" Lift - 200/208 Duration at .050
(Using 1.6:1 Roller Rockers)
.519"/.528" Lift (Gobs of mid-top end power! Can't wait for the turbo.)
:)
- Bernd
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of scsilverdak
Sent: Monday, May 27, 2002 11:57 AM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: RE: Camshaft Regrinding
Bernd-
If I sent this cam to SPEEDTWEAKS could this be done
to this cam I already have, or is this a service not offered by
SPEEDTWEAKS? I figure you might have some idea of a profile that would
work with the supercharger on a 5.2.
Ron-
2001 Dakota Sport 3.9 supercharged br silver
e-mail: scsilverdak@hotmail.com
website: www.scsilverdak.com
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@dakota-truck.net>
Sent: Monday, May 27, 2002 2:42 PM
Subject: DML: RE: Camshaft Regrinding
>
> Ron,
>
> Yes...the cam in my truck is a new (factory) cam that was reground
> with more aggressive lobes.
>
> If done right...regrounds are just as good as new grinds. This has
> been done for many years with excellent results. It's the "El-Cheapo"
> reground cams that you have to watch out for...these can be found in
> many of the Auto-Parts Store "Remanufactured" engines. (Stay away
> from those or ask for a new cam in that case.)
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of scsilverdak
> Sent: Monday, May 27, 2002 11:30 AM
> To: dml@dakota-truck.net
> Subject: DML: Camshaft Regrinding
>
>
>
> I have an old article of Sport Truck and Mopar
> Muscle Magazine on Dakota modifications that states
> that the stock camshafts for Magnum engines can be
> reground with a performance profile which would save the
> cost of a new cam purchase. Has anyone on this list done this and if
> so where was the cam sent to have this done? Or is this something NOT
> recommended to do? or should I bite the bullet and buy another cam for
> my 5.2.
>
> Ron-
> 2001 Dakota Sport 3.9 supercharged br silver
> e-mail: scsilverdak@hotmail.com
> website: www.scsilverdak.com
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:36 EDT