> Can you tell me more info on the 4.7L cams in production? I have a 2K 4.7
> auto 4x4, and www.krcperformance.com is advertising H.O. cams with a 20
> lb-ft increase in torque, across the band, for $200.00 (for both). These
> are essentially cams from the new 4.7 H.O. in the 03 Jeep G.C.
> I am ready to buy them, can you convince me why I should wait for yours?
> TIA
> Paul
Paul,
If they are only $200 a pair I will buy them just to regrind them
for our cams. I would think the price would be closer to $200 or
more each. Cams and kits for overhead cam engines are very
complex vs. an overhead valve engine. We are still working out
the bugs. The factory H.O. engine is rated at 35 flywheekl hp
more than the stnd engine. It has more compression, lighter
pistons, different cam, valve springs, intake system and intake
manifold. I would question 20 hp from the cams only. As a side
note, there is NOT a lot of interest in mods for this engine.
Dave
Hughes Engines inc.
23334 Wiegand Lane
Washington, IL 61571
Any input on this????
Paul
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:43 EDT