RE: RE: RE: O2 sensor help needed

From: Ronald Wong (ron-wong@cox.net)
Date: Fri Jun 07 2002 - 20:18:10 EDT


Air impact will do it! ;-)

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY

-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net]On Behalf Of Rick Barnes
Sent: Friday, June 07, 2002 10:27 AM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: RE: O2 sensor help needed

Had the same trouble on a Honda Accord Sensor once..boxend wrench with a
breaker bar finally made it give up. Good advice from Steve, (as
usual).
Rascal

-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Stlaurent Mr
Steven
Sent: Friday, June 07, 2002 9:05 AM
To: 'dakota-truck@dakota-truck.net'
Subject: DML: RE: O2 sensor help needed

Ensure the engine is cold.
Quirt penetration oil at the O2 seal and the manifold.
Disconnect the battery cables.
Disconnect the O2 connector wires
Use a close-end box wench.
Run the wire through the close-end and over the O2 nut ring.

Now remember, the wench cannot be a small length type.

Use a hammer to tap the open-end portion of the wench (not to hard)
until
the O2 begins to move in a anti-clockwise direction.

--------------------------------------
Steven St.Laurent
C4i System Engineer
C4i Engineering Branch, PSD, MCTSSA
MARCORSYSCOM, U.S. Marine Corps
Office (760) 725-2506 (DSN Prefix: 365)
"Never be content with somebody else definition
of you. Instead, define yourself by your own beliefs,
your own truths, your own understanding of who
you are. Never be content until you are happy with
 the unique person GOD has created you to be."

-----Original Message-----
From: Gary Hedlin [mailto:ghedlin@theramp.net]
Sent: Thursday, June 06, 2002 11:14 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: O2 sensor help needed

Last night I tried to replace my oxygen sensor, and it seems its really
stuck in there. Its the factory sensor, and it needs replaced because
now
my check engine light is on and i'm getting codes related to it. I got
the
special wrench from Auto Zone when I got the sensor, and I tried
everything
from using a cheater bar to giving it a shot of PB, and still its not
bugdging.

Does anyone have any ideas on getting this puppy out? My knucles cant
take
any more!

Gary Hedlin
"The Crazy Quadraplegic"
ghedlin@theramp.net (business)
ragingquad@yahoo.com (personal)
**Also Webmaster For**
http://garyhedlin.com
http://socaldakota.com
http://scsilverdak.com
http://assistivetechnologies.com
...And Many More!



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:43 EDT