RE: Dash gone nuts - no bus? Need help fast!

From: Rick Barnes (barnesrv@attbi.com)
Date: Fri Jun 07 2002 - 23:32:10 EDT


What made you go to code 110 Andy? I could not find anything about
"900" codes.
Rascal

-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Andy Levy
Sent: Friday, June 07, 2002 11:02 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Dash gone nuts - no bus? Need help fast!

OK, I've been to the FSM now. Page 8E-7 lists every code I have (and
they all make sense given the gauges), but they all have "check X" for
the correction. Code 110 says "replace the cluster" which is easy.

Should I replace the cluster and see if that fixes it, or try those
other steps first?

Andy Levy wrote:

>
> Was just driving home from the movies and my dash went nuts. I don't
> know what's going on. Haven't checked my FSM yet because I want to
> get this written down before I forget anything.
>
> '99 318 4x4 auto w/ 50K on the clock.
>
> Went to the movies and left a cell phone plugged in and charging.
> Done it before, haven't had any problems. Started the truck and the
> gas gauge didn't come up. ABS and Air Bag lights stayed on, and a
> chime rang. I shut down and fired it up, and everything was OK.
>
> Got a little ways down the road and the ABS and Air Bag lights came
> back on, and the chime. Then all was well again.
>
> A little further along, the odometer started flashing, then read "no
> bus". ALL gauges went dead, and the ABS, Air Bag, and Low Gas light
> came on. Chimes again. Then it recovered.
>
> And then it was dead again. And stayed dead the rest of the way home.

> Overdrive doesn't respond either.
>
> I got home and shut down. Held the odometer button in while turning
> the key to ON to check for codes. I got CheC then the following
> codes: 900, 920, 921, 940, 950, 999
>
> Engine started right up after that, but again, Air Bag and ABS stayed
> lit.
>
> Where do I start? I'm thinking about resetting the PCM in the morning

> to see if that will help, or at least clear the codes. But right now
> I don't get a warm fuzzy about the truck going any kind of distance -
> and I'm supposed to help a friend move tomorrow!
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:43 EDT